1. Follow the General Setup Steps #
Please follow the common setup steps first.
2. Activate Virtualization inside BIOS #
While bootup you´ve to go into your BIOS to make a small change. This you can archive by pressing a specific key while the system is booting up. Most common is DEL or F2, but here are some Hotkeys for some Mainboards:
- ASRock: F2 or DEL
- ASUS: F2 for all PCs, F2 or DEL for Motherboards
- Acer: F2 or DEL
- Dell: F2 or F12
- ECS: DEL
- Gigabyte / Aorus: F2 or DEL
- HP: F10
- Lenovo (Consumer Laptops): F2 or Fn + F2
- Lenovo (Desktops): F1
- Lenovo (ThinkPads): Enter then F1.
- MSI: DEL for motherboards and PCs
- Microsoft Surface Tablets: Press and hold volume up button.
- Origin PC: F2
- Samsung: F2
- Toshiba: F2
- Zotac: DEL
When you´re inside the BIOS please make these changes depending on your BIOS:
INTEL CPU
AMD CPU
- ENABLE SVM (CPU Virtualization) in your BIOS
3. Perm Spoofers #
If you used ANY permanent Spoofer in the past, its most likely your Serials are fucked up now. Please reinstall you Windows in terms to have a clean setup.
4. Official Windows #
It is required to have an official Windows build and no custom stuff. If you have a custom Windows, please install an official one!